The A1 cycling trainer has a prefabricated slope of 3%.

A: The noise of X3 tire-grinding cycling trainer is relatively loud  when riding at high speed. Other direct-drive trainers are very quiet, and basically the loudest noise during the ride is the sound of the chain [...]

A: The cycling trainer is equipped with a power adapter, and the input voltage is 100V-240V. However, because the universal plug standard of each country is not the same, so, if not suitable, please buy another [...]

A: The new X5 and X7 use the belt automatic tensioning design, so even if the belt is stretched after long-term use, the automatic tensioning mechanism will automatically adjust the tensioning force to reduce errors. [...]

A: Because the belt will be naturally stretched for a long-time using, resulting in changes in belt tensioning force, indirectly leading to the increase of power calculation error. Therefore, spindown calibration is to eliminate the error [...]

A: The power output on the cycling trainer corresponds to the trampling power emitted by the rider in the process of riding. According to the physical formula: power = speed x force. On the cycling trainer, [...]

A: Denotes the maximum resistance built into the cycling trainer, and the resistance value of the corresponding maximum climbing slope that can be simulated; In general, the driver's weight is 70kg as a reference.

A: The power accuracy indicated in the technical parameters of the cycling trainer, such as ±2%, represents the average error between the output power value of the machine (work done by the rider) and the [...]

A: The X3 is a tyre-grinding smart trainer (you don't need to remove the rear wheels), while the X5 and X7 are direct-drive (you need to remove the rear wheels to use the trainer). X3 is [...]

A: Power A1 is a pure POWER cycling trainer (with built-in POWER meter), which can be used alone or connected with various cycling software. The difference is that A1 is built in constant resistance, can [...]